Creates a new PathReinforcement object from an array of curves and given Rebar Shape id.

Namespace: Autodesk.Revit.DB.Structure
Assembly: RevitAPI (in RevitAPI.dll) Version: 21.0.0.0 (21.1.1.109)
Since: 2016

Syntax

C#
public static PathReinforcement Create( Document document, Element hostElement, IList<Curve> curveArray, bool flip, ElementId pathReinforcementTypeId, ElementId rebarBarTypeId, ElementId startRebarHookTypeId, ElementId endRebarHookTypeId, ElementId rebarShapeId )

public static PathReinforcement Create(
	Document document,
	Element hostElement,
	IList<Curve> curveArray,
	bool flip,
	ElementId pathReinforcementTypeId,
	ElementId rebarBarTypeId,
	ElementId startRebarHookTypeId,
	ElementId endRebarHookTypeId,
	ElementId rebarShapeId
)

Visual Basic
Public Shared Function Create ( _ document As Document, _ hostElement As Element, _ curveArray As IList(Of Curve), _ flip As Boolean, _ pathReinforcementTypeId As ElementId, _ rebarBarTypeId As ElementId, _ startRebarHookTypeId As ElementId, _ endRebarHookTypeId As ElementId, _ rebarShapeId As ElementId _ ) As PathReinforcement

Visual Basic

Public Shared Function Create ( _
	document As Document, _
	hostElement As Element, _
	curveArray As IList(Of Curve), _
	flip As Boolean, _
	pathReinforcementTypeId As ElementId, _
	rebarBarTypeId As ElementId, _
	startRebarHookTypeId As ElementId, _
	endRebarHookTypeId As ElementId, _
	rebarShapeId As ElementId _
) As PathReinforcement

Visual C++
public: static PathReinforcement^ Create( Document^ document, Element^ hostElement, IList<Curve^>^ curveArray, bool flip, ElementId^ pathReinforcementTypeId, ElementId^ rebarBarTypeId, ElementId^ startRebarHookTypeId, ElementId^ endRebarHookTypeId, ElementId^ rebarShapeId )

Visual C++

public:
static PathReinforcement^ Create(
	Document^ document, 
	Element^ hostElement, 
	IList<Curve^>^ curveArray, 
	bool flip, 
	ElementId^ pathReinforcementTypeId, 
	ElementId^ rebarBarTypeId, 
	ElementId^ startRebarHookTypeId, 
	ElementId^ endRebarHookTypeId, 
	ElementId^ rebarShapeId
)

Parameters

document: Type: Autodesk.Revit.DB..::..Document
The document.

hostElement: Type: Autodesk.Revit.DB..::..Element
The element that will host the PathReinforcement. The host can be a Structural Floor, Structural Wall, Structural Slab, or a Part created from a structural layer belonging to one of those element types.

curveArray: Type: System.Collections.Generic..::..IList<(Of <(<'Curve>)>)>
An array of curves that will define the outline of the PathReinforcement.

flip: Type: System..::..Boolean
A flag controlling the bars relative to the curves.

pathReinforcementTypeId: Type: Autodesk.Revit.DB..::..ElementId
The id of the PathReinforcementType.

rebarBarTypeId: Type: Autodesk.Revit.DB..::..ElementId
The id of the RebarBarType.

startRebarHookTypeId: Type: Autodesk.Revit.DB..::..ElementId
The id of the RebarHookType for the start of the bar. If this parameter is InvalidElementId, it means to create a rebar with no start hook.

endRebarHookTypeId: Type: Autodesk.Revit.DB..::..ElementId
The id of the RebarHookType for the end of the bar. If this parameter is InvalidElementId, it means to create a rebar with no end hook.

rebarShapeId: Type: Autodesk.Revit.DB..::..ElementId
The id of the RebarShape element that defines the shape of the rebars in the object.

Return Value

The newly created PathReinforcement.

Remarks

The method sets Rebar Shape of primary bars only.

Exceptions

Exception	Condition
Autodesk.Revit.Exceptions..::..ArgumentException	The input curveArray is empty. -or- The input curveArray contains at least one helical curve and is not supported for this operation. -or- The element hostElement was not found in the given document. -or- the host Element is not a valid host for Area Reinforcement, Path Reinforcement, Fabric Area or Fabric Sheet. -or- The structural rebar is not within area and path reinforcement. -or- curves in curveArray are not continuous and open. -or- pathReinforcementTypeId should refer to an Path Reinforcement Type element. -or- rebarBarTypeId should refer to an RebarBarType element. -or- startRebarHookTypeId should be invalid or refer to an RebarHookType element. -or- endRebarHookTypeId should be invalid or refer to an RebarHookType element. -or- rebarShapeId should refer to two dimensional Rebar Shape element with segments forming only right angles.
Autodesk.Revit.Exceptions..::..ArgumentNullException	A non-optional argument was NULL
Autodesk.Revit.Exceptions..::..ArgumentsInconsistentException	startRebarHookTypeId cannot be set for given rebar shape. -or- endRebarHookTypeId cannot be set for given rebar shape.
Autodesk.Revit.Exceptions..::..DisabledDisciplineException	None of the following disciplines is enabled: Structural.
Autodesk.Revit.Exceptions..::..ForbiddenForDynamicUpdateException	This method may not be called during dynamic update.

Syntax

Parameters

Return Value

Remarks

Exceptions

See Also