FabricSheet Methods

The FabricSheet type exposes the following members.

Methods

  NameDescription
Public methodArePhasesModifiable
Returns true if the properties CreatedPhaseId and DemolishedPhaseId can be modified for this Element.
(Inherited from Element.)
Public methodCanBeHidden
Indicates if the element can be hidden in the view.
(Inherited from Element.)
Public methodCanBeLocked
Identifies if the element can be locked.
(Inherited from Element.)
Public methodCanDeleteSubelement
Checks if given subelement can be removed from the element.
(Inherited from Element.)
Public methodCanHaveAnalyticalModel
Indicates whether the Element can have an Analytical Model.
(Inherited from Element.)
Public methodCanHaveTypeAssigned()()()()
Identifies if the element can have a type assigned.
(Inherited from Element.)
Public methodChangeTypeId(ElementId)
Changes the type of the element.
(Inherited from Element.)
Public methodStatic memberCreate(Document, Element, ElementId)
Creates a new instance of a single flat Fabric Sheet element within the project.
Public methodStatic memberCreate(Document, ElementId, ElementId, CurveLoop)
Creates a new instance of a single bent Fabric Sheet element within the project.
Public methodDeleteEntity
Deletes the existing entity created by %schema% in the element
(Inherited from Element.)
Public methodDeleteSubelement
Removes a subelement from the element.
(Inherited from Element.)
Public methodDeleteSubelements
Removes the subelements from the element.
(Inherited from Element.)
Public methodDispose (Inherited from Element.)
Public methodEquals
Determines whether the specified Object is equal to the current Object.
(Inherited from Object.)
Public methodGetAnalyticalModel
Retrieves writeable Analytical Model for Element.
(Inherited from Element.)
Public methodGetAnalyticalModelId
Retrieves the Element Id of the Analytical Model Element for this Element.
(Inherited from Element.)
Public methodGetBendProfile
Returns the profile (not including generated fillets) that defines the shape of the Fabric Sheet bending.
Public methodGetBendProfileWithFillets
Returns the profile with generated fillets that defines the shape of the Fabric Sheet bending.
Public methodGetDependentElements
Get all elements that, from a logical point of view, are the children of this Element.
(Inherited from Element.)
Public methodGetEntity
Returns the existing entity corresponding to the Schema if it has been saved in the Element, or an invalid entity otherwise.
(Inherited from Element.)
Public methodGetEntitySchemaGuids
Returns the Schema guids of any Entities stored in this element.
(Inherited from Element.)
Public methodGetExternalFileReference
Gets information pertaining to the external file referenced by the element.
(Inherited from Element.)
Public methodGetExternalResourceReference
Gets the ExternalResourceReference associated with a specified external resource type.
(Inherited from Element.)
Public methodGetExternalResourceReferences
Gets the full map of the external resource references referenced by the element.
(Inherited from Element.)
Public methodGetGeneratingElementIds
Returns the ids of the element(s) that generated the input geometry object.
(Inherited from Element.)
Public methodGetGeometryObjectFromReference
Retrieve one geometric primitive contained in the element given a reference.
(Inherited from Element.)
Public methodGetHashCode
Serves as a hash function for a particular type.
(Inherited from Object.)
Public methodGetMaterialArea
Gets the area of the material with the given id.
(Inherited from Element.)
Public methodGetMaterialIds
Gets the element ids of all materials present in the element.
(Inherited from Element.)
Public methodGetMaterialVolume
Gets the volume of the material with the given id.
(Inherited from Element.)
Public methodGetMonitoredLinkElementIds
Provides the link instance IDs when the element is monitoring.
(Inherited from Element.)
Public methodGetMonitoredLocalElementIds
Provides the local element IDs when the element is monitoring.
(Inherited from Element.)
Public methodGetOrderedParameters
Gets the parameters associated to the element in order.
(Inherited from Element.)
Public methodGetParameter
Retrieves a parameter from the element given identifier.
(Inherited from Element.)
Public methodGetParameterFormatOptions
Returns a FormatOptions override for the element Parameter, or a default FormatOptions if no override exists.
(Inherited from Element.)
Public methodGetParameters
Retrieves the parameters from the element via the given name.
(Inherited from Element.)
Public methodGetPhaseStatus
Gets the status of a given element in the input phase
(Inherited from Element.)
Public methodGetReinforcementRoundingManager
Returns an object for managing reinforcement rounding override settings.
Public methodGetSegmentParameterIdsAndLengths
Returns the array of pairs [parameter ID, length] that correspond to segments of a bent fabric sheet (like A, B, C, D etc.).
Public methodGetSheetLocation
Gets the position and the orientation of the Fabric Sheet instance.
Public methodGetSubelements
Returns the collection of element subelements.
(Inherited from Element.)
Public methodGetType
Gets the Type of the current instance.
(Inherited from Object.)
Public methodGetTypeId
Returns the identifier of this element's type.
(Inherited from Element.)
Public methodGetValidTypes()()()()
Obtains a set of types that are valid for this element.
(Inherited from Element.)
Public methodGetWireCenterlines()()()()
Gets a list of curves representing the wires centerlines of the Fabric Sheet in the both distribution directions.
Public methodGetWireCenterlines(WireDistributionDirection)
Gets a list of curves representing the wires centerlines of the Fabric Sheet.
Public methodHasPhases
Returns true if this Element has the properties CreatedPhaseId and DemolishedPhaseId.
(Inherited from Element.)
Public methodIsCoverOffsetValid
Identifies if the specified value is valid for use as a cover offset.
Public methodIsCreatedPhaseOrderValid
Returns true if createdPhaseId and demolishedPhaseId are in order.
(Inherited from Element.)
Public methodIsDemolishedPhaseOrderValid
Returns true if createdPhaseId and demolishedPhaseId are in order.
(Inherited from Element.)
Public methodIsExternalFileReference
Determines whether this Element represents an external file.
(Inherited from Element.)
Public methodIsHidden
Identifies if the element has been permanently hidden in the view.
(Inherited from Element.)
Public methodIsMonitoringLinkElement
Indicate whether an element is monitoring any elements in any linked models.
(Inherited from Element.)
Public methodIsMonitoringLocalElement
Indicate whether an element is monitoring other local elements.
(Inherited from Element.)
Public methodIsPhaseCreatedValid
Returns true if createdPhaseId is an allowed value for the property CreatedPhaseId in this Element.
(Inherited from Element.)
Public methodIsPhaseDemolishedValid
Returns true if demolishedPhaseId is an allowed value for the property DemolishedPhaseId in this Element.
(Inherited from Element.)
Public methodIsSingleFabricSheetWithinHost
Identifies if the specified single Fabric Sheet position is within the host.
Public methodIsSolidInView
Checks if this fabric sheet is shown solidly in a 3D view.
Public methodIsUnobscuredInView
Checks if this fabric sheet is shown unobscured in a view.
Public methodStatic memberIsValidHost(Element)
Checks whether an element is a valid host for fabric sheet.
Public methodStatic memberIsValidHost(Document, ElementId)
Checks whether an element is a valid host for fabric sheet.
Public methodIsValidType(ElementId)
Checks if given type is valid for this element.
(Inherited from Element.)
Public methodLookupParameter
Attempts to find a parameter on the element which has the given name.
(Inherited from Element.)
Public methodPlaceInHost
Inserts the single Fabric Sheet instance into the host element.
Public methodRefersToExternalResourceReference
Determines whether this Element uses external resources associated with a specified external resource type.
(Inherited from Element.)
Public methodRefersToExternalResourceReferences
Determines whether this Element uses external resources.
(Inherited from Element.)
Public methodSetBendProfile
Sets new profile that defines the shape of the Fabric Sheet bending.
Public methodSetEntity
Stores the entity in the element. If an Entity described by the same Schema already exists, it is overwritten.
(Inherited from Element.)
Public methodSetSegmentLength
Sets the value of the bent fabric sheet segment(like A, B, C, D etc.)
Public methodSetSolidInView
Sets this fabric sheet to be shown solidly in a 3D view.
Public methodSetUnobscuredInView
Sets this fabric sheet to be shown unobscured in a view.
Public methodToString
Returns a string that represents the current object.
(Inherited from Object.)

See Also