| Revit 2022.1 API |
| BuiltInFailures..::..MassFailures Members |
| BuiltInFailures..::..MassFailures Class Properties See Also |
Provides a container of all Revit built-in FailureDefinitionId instances.
The BuiltInFailures..::..MassFailures type exposes the following members.
Properties
| Name | Description | |
|---|---|---|
  | AutoGlazingFailed |
Failure in Auto-Glazing region computation.
|
| AutoGlazingFailedError |
Failure in Auto-Glazing region computation.
|
| BooleanUnionFailed |
Failed to merge overlapping solids
|
| CannotIntegrate |
In order to restore an element's 'Constrain to Massing' property to 'Dependent', it must be in the main model with the massing.
|
| CannotMergeGeometry |
The Mass contains geometry that cannot be combined. Mass Floors, volume, and surface area, won't be computed.
|
| CannotMoveMassing |
Can't move whole Massing. Move the elements within the Massing instead.
|
| CreateCoreGeometryFailed |
Failed to create core geometries.
|
| DividePerimeterZoneFailed |
Failed to divide perimeter zone.
|
| FaceRegionCreationFailed |
Failure in face region creation.
|
| FaceSplitFailed |
A face of a joined (i.e. one cuts another) mass could not be split into interior and exterior faces. Remove the cut to resolve.
|
| FloorAreaFaceFailed |
Failed to create a Mass Floor.
|
| FloorMightLookWrong |
Mass Floors may appear incorrect since the Mass contains mesh and solid geometry.
|
| MinSkylightWidthImperial |
The minimum skylight width is 8 inches.
|
| MinSkylightWidthMetric |
The minimum skylight width is 203.2 millimeters.
|
| MultipleMassing |
Can't complete operation. Massing can only exist in one Workset. Change Workset of Massing to match in Local and Central Models.
|
| NoCurtainRoofsInMassing |
Massing cannot be created with a curtain roof. Please change the default roof type and try again.
|
| NonOccupiableMassZone |
For mass zone, if the bottom level ref does not intersect, then this zone is going to be "not occupiable" and a warning is posted for it.
|
| NoSolidInMass |
Mass contains no solid geometry. Mass Floors, volume, and surface area, won't be computed.
|
| OpenAndSolidGeometry |
Mass contains both solid and mesh geometry. Mass Floors, volume, and surface area, may appear incorrect.
|
| OpenGeometryOnly |
Mass contains only mesh geometry, which can't be used to compute Mass Floors, volume, or surface area.
|
| OverlappingSolids |
Found volumetric overlap between solids. They will be merged into one
|
| SketchCurveNotModelable |
This action cannot be completed. An element created by massing has a sketch line that cannot be modeled.
|
| SplitFacesByGroundPlaneCrashed |
Failed to split face by ground plane.
|
| SplitFacesByGroundPlaneFailed |
Failed to split face by ground plane.
|
| SplitOverlappingFacesFailed |
Failed to resolve all overlaps between faces of the same Mass Energy Analytical Model.
|
| TooManyGeometries |
The geometry in this Mass instance is too complex to take advantage of the capabilities a Mass provides. Please break it down into multiple Mass and family instances that are less complex.
|
| UpgradedMassingWarning |
Your document contained a Massing element which has been upgraded to a Mass instance. Please review the documentation on the new enhanced Mass capabilities to understand the implications of this change.
|