Syntax

C#
public StructuralSectionGeneralT( double width, double height, double flangeThickness, double flangeThicknessLocation, double flangeFillet, double flangeToeOfFillet, double slopedFlangeAngle, double webThickness, double webThicknessLocation, double webFillet, double topWebFillet, double webToeOfFillet, double slopedWebAngle, double centroidHorizontal, double centroidVertical, StructuralSectionAnalysisParams analysisParams )

public StructuralSectionGeneralT(
	double width,
	double height,
	double flangeThickness,
	double flangeThicknessLocation,
	double flangeFillet,
	double flangeToeOfFillet,
	double slopedFlangeAngle,
	double webThickness,
	double webThicknessLocation,
	double webFillet,
	double topWebFillet,
	double webToeOfFillet,
	double slopedWebAngle,
	double centroidHorizontal,
	double centroidVertical,
	StructuralSectionAnalysisParams analysisParams
)

Visual Basic
Public Sub New ( _ width As Double, _ height As Double, _ flangeThickness As Double, _ flangeThicknessLocation As Double, _ flangeFillet As Double, _ flangeToeOfFillet As Double, _ slopedFlangeAngle As Double, _ webThickness As Double, _ webThicknessLocation As Double, _ webFillet As Double, _ topWebFillet As Double, _ webToeOfFillet As Double, _ slopedWebAngle As Double, _ centroidHorizontal As Double, _ centroidVertical As Double, _ analysisParams As StructuralSectionAnalysisParams _ )

Visual Basic

Public Sub New ( _
	width As Double, _
	height As Double, _
	flangeThickness As Double, _
	flangeThicknessLocation As Double, _
	flangeFillet As Double, _
	flangeToeOfFillet As Double, _
	slopedFlangeAngle As Double, _
	webThickness As Double, _
	webThicknessLocation As Double, _
	webFillet As Double, _
	topWebFillet As Double, _
	webToeOfFillet As Double, _
	slopedWebAngle As Double, _
	centroidHorizontal As Double, _
	centroidVertical As Double, _
	analysisParams As StructuralSectionAnalysisParams _
)

Visual C++
public: StructuralSectionGeneralT( double width, double height, double flangeThickness, double flangeThicknessLocation, double flangeFillet, double flangeToeOfFillet, double slopedFlangeAngle, double webThickness, double webThicknessLocation, double webFillet, double topWebFillet, double webToeOfFillet, double slopedWebAngle, double centroidHorizontal, double centroidVertical, StructuralSectionAnalysisParams^ analysisParams )

Visual C++

public:
StructuralSectionGeneralT(
	double width, 
	double height, 
	double flangeThickness, 
	double flangeThicknessLocation, 
	double flangeFillet, 
	double flangeToeOfFillet, 
	double slopedFlangeAngle, 
	double webThickness, 
	double webThicknessLocation, 
	double webFillet, 
	double topWebFillet, 
	double webToeOfFillet, 
	double slopedWebAngle, 
	double centroidHorizontal, 
	double centroidVertical, 
	StructuralSectionAnalysisParams^ analysisParams
)

Parameters

width: Type: System..::..Double
Section width.

height: Type: System..::..Double
Section height, depth.

flangeThickness: Type: System..::..Double
Flange Thickness.

flangeThicknessLocation: Type: System..::..Double
Flange Thickness Location.

flangeFillet: Type: System..::..Double
Flange Fillet - fillet radius at the flange end.

flangeToeOfFillet: Type: System..::..Double
Detailing distance from center of web to flange toe of fillet, in. (mm)

slopedFlangeAngle: Type: System..::..Double
Sloped flange angle. (rad)

webThickness: Type: System..::..Double
Web Thickness.

webThicknessLocation: Type: System..::..Double
Web Thickness Location.

webFillet: Type: System..::..Double
Web Fillet - fillet radius between web and flange.

topWebFillet: Type: System..::..Double
Top Web Fillet - fillet radius at the top of web.

webToeOfFillet: Type: System..::..Double
Detailing distance from outer face of flange to web toe of fillet, in. (mm)

slopedWebAngle: Type: System..::..Double
Sloped web angle. (rad)

centroidHorizontal: Type: System..::..Double
Distance from centroid to the left extremites along horizontal axis.

centroidVertical: Type: System..::..Double
Distance from centroid to the upper extremites along vertical axis.

analysisParams: Type: Autodesk.Revit.DB.Structure.StructuralSections..::..StructuralSectionAnalysisParams
Common set of parameters for structural analysis.

Syntax

Parameters

See Also