| Revit 2024 API |
| WallSweepInfo Properties |
| WallSweepInfo Class See Also |
The WallSweepInfo type exposes the following members.
Properties
| Name | Description | |
|---|---|---|
 | CutsWall |
Indicates if you want the sweep to cut geometry out of the host wall.
|
| DefaultSetback |
The sweep setback distance from inserts, such as windows and doors.
|
| Distance |
Represents the distance from either the top or base of the wall for horizontal sweeps,
or the parameter along the wall's path curve for vertical ones.
|
| DistanceMeasuredFrom |
Indicates if Distance is measured from the top or bottom of the wall.
|
| Id |
The id of the sweep or reveal.
|
| IsCutByInserts |
Indicates if the sweep is cut by wall inserts.
|
| IsFixed |
Indicates if the described wall sweep is fixed. A sweep is fixed if it is a part of a vertical compound structure.
|
| IsProfileFlipped |
Indicates if the profile is applied upside-down.
|
| IsValidObject |
Specifies whether the .NET object represents a valid Revit entity.
|
| IsVertical |
Indicates whether the sweep or reveal is swept vertically or horizontally.
|
| MaterialId |
The element id of the material used to create the sweep or reveal.
|
| ProfileId |
The element id of the profile family used to create the sweep or reveal.
|
| WallOffset |
The offset from the sweep or reveal to the wall.
|
| WallSide |
The side of the wall to which the sweep or reveal is attached.
|
| WallSweepOrientation |
Indicates how the profile of a horiztonal sweep is oriented with repect to the wall side face.
|
| WallSweepType |
The type (either a wall sweep or a reveal).
|