RhinoCommon API

GeometryAttributeFilter Enumeration

If an object passes the geometry TYPE filter, then the geometry ATTRIBUTE filter is applied.

Namespace: Rhino.Input.Custom
Assembly: RhinoCommon (in RhinoCommon.dll)

Syntax

[FlagsAttribute]
public enum GeometryAttributeFilter

<FlagsAttribute>
Public Enumeration GeometryAttributeFilter

Members

Member name	Value	Description
WireCurve	1	3d wire curve If you want to accept only wire or edge curves, then specify wire_curve or edge_curve, otherwise both wire and edge curves will pass the attribute filter.
EdgeCurve	2	3d curve of a surface edge If you want to accept only wire or edge curves, then specify wire_curve or edge_curve, otherwise both wire and edge curves will pass the attribute filter.
ClosedCurve	4	Closed Curves and Edges are acceptable If you want to accept only closed or open curves, then specify either closed_curve or open_curve. Otherwise both closed and open curves will pass the attribute filter.
OpenCurve	8	Open Curves and Edges are acceptable If you want to accept only closed or open curves, then specify either closed_curve or open_curve. Otherwise both closed and open curves will pass the attribute filter.
SeamEdge	16	seam edges are acceptable attributes of acceptable trimming edge objects (associated with an ON_BrepTrim). If none of these attributes are explicitly specified, then any kind of trimming edge will pass the attribute filter.
ManifoldEdge	32	edges with 2 different surfaces pass attributes of acceptable trimming edge objects (associated with an ON_BrepTrim). If none of these attributes are explicitly specified, then any kind of trimming edge will pass the attribute filter.
NonmanifoldEdge	64	edges with 3 or more surfaces pass attributes of acceptable trimming edge objects (associated with an ON_BrepTrim). If none of these attributes are explicitly specified, then any kind of trimming edge will pass the attribute filter.
MatedEdge	112	any mated edge passes attributes of acceptable trimming edge objects (associated with an ON_BrepTrim). If none of these attributes are explicitly specified, then any kind of trimming edge will pass the attribute filter.
SurfaceBoundaryEdge	128	boundary edges on surface sides pass attributes of acceptable trimming edge objects (associated with an ON_BrepTrim). If none of these attributes are explicitly specified, then any kind of trimming edge will pass the attribute filter.
TrimmingBoundaryEdge	256	boundary edges that trim a surface pass attributes of acceptable trimming edge objects (associated with an ON_BrepTrim). If none of these attributes are explicitly specified, then any kind of trimming edge will pass the attribute filter.
BoundaryEdge	384	ant boundary edge passes attributes of acceptable trimming edge objects (associated with an ON_BrepTrim). If none of these attributes are explicitly specified, then any kind of trimming edge will pass the attribute filter.
ClosedSurface	512	If you want to accept only closed or open surfaces, then specify either closed_surface or open_surface. Otherwise both closed and open surfaces will pass the attribute filter.
OpenSurface	1024	If you want to accept only closed or open surfaces, then specify either closed_surface or open_surface. Otherwise both closed and open surfaces will pass the attribute filter.
TrimmedSurface	2048	If you want to accept only trimmed or untrimmed surfaces, then specify either trimmed_surface or untrimmed_surface. Otherwise both trimmed and untrimmed surfaces will pass the attribute filter.
UntrimmedSurface	4096	If you want to accept only trimmed or untrimmed surfaces, then specify either trimmed_surface or untrimmed_surface. Otherwise both trimmed and untrimmed surfaces will pass the attribute filter.
SubSurface	8192	If you want to accept only sub-surfaces of (multi-surface) polysrf, then specify sub_surface. If you do not want to accept sub-surfaces, then specify top_surface. Otherwise sub-surfaces and top surfaces will pass the attribute filter.
TopSurface	16384	If you want to accept only sub-surfaces of (multi-surface) polysrf, then specify sub_surface. If you do not want to accept sub-surfaces, then specify top_surface. Otherwise sub-surfaces and top surfaces will pass the attribute filter.
ManifoldPolysrf	32768	If you want to accept only manifold or nonmanifold polysrfs, then specify manifold_polysrf or nonmanifold_polysrf. Otherwise both manifold and nonmanifold polysrfs will pass the attribute filter.
NonmanifoldPolysrf	65536	If you want to accept only manifold or nonmanifold polysrfs, then specify manifold_polysrf or nonmanifold_polysrf. Otherwise both manifold and nonmanifold polysrfs will pass the attribute filter.
ClosedPolysrf	131072	If you want to accept only closed or open polysrfs, then specify either closed_polysrf or open_polysrf. Otherwise both closed and open polysrfs will pass the attribute filter.
OpenPolysrf	262144	If you want to accept only closed or open polysrfs, then specify either closed_polysrf or open_polysrf. Otherwise both closed and open polysrfs will pass the attribute filter.
ClosedMesh	524288	If you want to accept only closed or open meshs, then specify either closed_mesh or open_mesh. Otherwise both closed and open meshs will pass the attribute filter.
OpenMesh	1048576	If you want to accept only closed or open meshs, then specify either closed_mesh or open_mesh. Otherwise both closed and open meshs will pass the attribute filter.
BoundaryInnerLoop	2097152	all trimming edges are boundary edges.
MatedInnerLoop	4194304	all trimming edges are mated.
InnerLoop	6291456	any inner loop is acceptable.
BoundaryOuterLoop	8388608	all trimming edges are boundary edges.
MatedOuterLoop	16777216	all trimming edges are mated.
OuterLoop	25165824	any outer loop is acceptable.
SpecialLoop	33554432	slit, crvonsrf, ptonsrf, etc.
AcceptAllAttributes	4294967295

Version Information

Rhino for Mac

Supported in: 5.4

Rhino for Windows

Supported in: 6.14

Reference

Rhino.Input.Custom Namespace

Report wishes and bugs at discourse.mcneel.com