FabricationPart Properties

The FabricationPart type exposes the following members.

Properties

  NameDescription
Public propertyAlias
The alias of the fabrication part.
Public propertyAssemblyInstanceId
The id of the assembly instance to which the element belongs.
(Inherited from Element.)
Public propertyBottomOfPartElevation
The associated elevation to the bottom of fabrication part off of the current level.
Public propertyBoundingBox
Retrieves a box that circumscribes all geometry of the element.
(Inherited from Element.)
Public propertyCategory
Retrieves a Category object that represents the category or sub category in which the element resides.
(Inherited from Element.)
Public propertyCenterlineLength
The centerline length of the fabrication part.
Public propertyConnectorManager
The connector manager of the fabrication part.
Public propertyCreatedPhaseId
Id of a Phase at which the Element was created.
(Inherited from Element.)
Public propertyCutType
The cut type of the fabrication part.
Public propertyDemolishedPhaseId
Id of a Phase at which the Element was demolished.
(Inherited from Element.)
Public propertyDesignOption
Returns the design option to which the element belongs.
(Inherited from Element.)
Public propertyDocument
Returns the Document in which the Element resides.
(Inherited from Element.)
Public propertyDomainType
The domain type for the fabrication part.
Public propertyDoubleWallMaterial
The double wall material identifier of the fabrication part.
Public propertyDoubleWallMaterialArea
The double wall material area of the fabrication part. If the fabrication part is not double walled, returns zero.
Public propertyDoubleWallMaterialThickness
The double wall material thickness of the fabrication part. If the fabrication part is not double walled, returns zero.
Public propertyFreeSize
The inner size of the fabrication part.
Public propertyGeometry
Retrieves the geometric representation of the element.
(Inherited from Element.)
Public propertyGeometryChecksum
Gets the geometry checksum of the fabrication part symbol, and it does nothing with the fabrication part instance position.
Public propertyGroupId
The id of the group to which an element belongs.
(Inherited from Element.)
Public propertyHangerRodKit
Specifies whether an ancillary kit is being used to override support rods, bolts and clips, if any. A value of 0 indicates no override is being used.
Public propertyHasDoubleWall
True if the fabrication part is double walled.
Public propertyHasInsulation
True if the fabrication part is insulated.
Public propertyHasLining
True if the fabrication part is lined.
Public propertyId
A unique identifier for an Element in an Autodesk Revit project.
(Inherited from Element.)
Public propertyInsulationArea
The insulation area of the fabrication part. If the fabrication part is not insulated, returns zero.
Public propertyInsulationSpecification
The fabrication part insulation specification identifier.
Public propertyInsulationThickness
The insulation thickness of the fabrication part. If the fabrication part is not insulated, returns zero.
Public propertyInsulationType
The insulation type of the fabrication part.
Public propertyIsBoughtOut
True if the fabrication part is bought out.
Public propertyIsModifiable
Identifies if the element is modifiable.
(Inherited from Element.)
Public propertyIsTransient
Indicates whether an element is transient or permanent.
(Inherited from Element.)
Public propertyIsValidObject
Specifies whether the .NET object represents a valid Revit entity.
(Inherited from Element.)
Public propertyItemCustomId
The item custom identifier for the fabrication part.
Public propertyItemNumber
The item number that is used for identification, re-ordering from shop.
Public propertyLevelId
The id of the level associated with the element.
(Inherited from Element.)
Public propertyLevelOffset
The associated level offset that indicates the distance from the center of the fabrication part to the current level.
Public propertyLiningArea
The lining area of the fabrication part. If the fabrication part is not lined, returns zero.
Public propertyLiningThickness
The lining thickness of the fabrication part. If the fabrication part is not lined, returns zero.
Public propertyLiningType
The lining type of the fabrication part.
Public propertyLocation
This property is used to find the physical location of an element within a project.
(Inherited from Element.)
Public propertyMaterial
The fabrication material identifier.
Public propertyMaterialGauge
The fabrication material gauge identifier.
Public propertyMaterialThickness
The material thickness of the fabrication part.
Public propertyName
A human readable name for the Element.
(Inherited from Element.)
Public propertyNotes
The notes of the fabrication part.
Public propertyOrigin
The origin of the fabrication part element.
Public propertyOverallSize
The overall size of the fabrication part.
Public propertyOwnerViewId
The id of the view that owns the element.
(Inherited from Element.)
Public propertyParameter[([( Guid])])
Retrieves a parameter from the element given a GUID for a shared parameter.
(Inherited from Element.)
Public propertyParameter[([( BuiltInParameter])])
Retrieves a parameter from the element given a parameter id.
(Inherited from Element.)
Public propertyParameter[([( Definition])])
Retrieves a parameter from the element based on its definition.
(Inherited from Element.)
Public propertyParameters
Retrieves a set containing all of the parameters that are contained within the element.
(Inherited from Element.)
Public propertyParametersMap
Retrieves a map containing all of the parameters that are contained within the element.
(Inherited from Element.)
Public propertyPartGuid
The fabrication part's globally unique identifier.
Public propertyPartStatus
The status identifier for the fabrication part.
Public propertyPinned
Identifies if the element has been pinned to prevent changes.
(Inherited from Element.)
Public propertyProductCode
The current database id of the part within the fabrication database.
Public propertyProductDataRange
The product data range of the fabrication part.
Public propertyProductFinishDescription
The product finish description of the fabrication part.
Public propertyProductInstallType
The product install type of the fabrication part.
Public propertyProductListEntry
The product entry index of the fabrication part. A value of -1 indicates the fabrication part is not a product list.
Public propertyProductLongDescription
The product long description of the fabrication part.
Public propertyProductMaterialDescription
The product material description of the fabrication part.
Public propertyProductName
The product name of the fabrication part.
Public propertyProductOriginalEquipmentManufacture
The product original equipment manufacture (OEM) of the fabrication part.
Public propertyProductShortDescription
The product short description of the fabrication part.
Public propertyProductSizeDescription
The product size description of the fabrication part.
Public propertyProductSpecificationDescription
The product specification description of the fabrication part.
Public propertyServiceAbbreviation
The associated service abbreviation for the fabrication service.
Public propertyServiceId
The fabrication part service identifier. The service can only be changed to compatible services.
Public propertyServiceName
The name of the service associated with the fabrication part.
Public propertyServiceType
The service type identifier of the fabrication part.
Public propertySheetMetalArea
The sheet metal area of the fabrication part.
Public propertySize
The size of the fabrication part.
Public propertySlope
The slope for the straight fabrication part.
Public propertySpecification
The fabrication part specification identifier.
Public propertySpoolName
The spool name of the fabrication part.
Public propertyTopOfPartElevation
The associated elevation to the top of fabrication part off of the current level.
Public propertyUniqueId
A stable unique identifier for an element within the document.
(Inherited from Element.)
Public propertyValidationStatus
The validation status of the fabrication part.
Public propertyVendor
The vendor of the fabrication part.
Public propertyVendorCode
The vendor code of the fabrication part.
Public propertyVersionGuid
Get the element version Guid.
(Inherited from Element.)
Public propertyViewSpecific
Identifies if the element is owned by a view.
(Inherited from Element.)
Public propertyWeight
The weight of the fabrication part.
Public propertyWorksetId
Get Id of the Workset which owns the element.
(Inherited from Element.)

See Also